Star-fst-l mailing list

[Zhenyu Ye <yezhenyu2003 AT gmail.com>]

Hi Steve,

> On Apr 5, 2019, at 8:17 AM, Valentino, Stephen <svalentino AT bnl.gov> wrote:
> 
> Hi Zhenyu,
> 
> As discussed in the meeting on Sunday, BNL will assemble the prototype 
> T-Boards and solder them to the Inner Signal Cables for the test stand.  We 
> ordered 10 cables as requested but there are only 6 bare T-Board PCBs 
> available.   
> We'll assemble one board, test it, then assemble the other 5.   Can we wait 
> until the first cable/T-Board assembly is confirmed in the test setup 
> before ordering the remaining T-Boards for the test cables?

Yes, this is fine with me.

Best,
Zhenyu 

>  I think this depends on when you need all 10 cable/T-board assemblies 
> completed.  Either way, there's probably not much risk if more prototype 
> T-boards are ordered now.  I assume the plan is to order the actual 36 
> (plus some spare) production T-Boards after the prototype board is fully 
> vetted in the future test setup.
> 
> Gerard,
> Attached is the modification instructions for the Patch Panel boards.  Let 
> me know if you have any comments.  We should start this in a few weeks.
> We'll test the individual boards after the modification and the fully 
> assembled panels should be tested in the future test setup.
> 
> Regards,
> Steve Valentino
> 631-344-4644
> 
> <FST Modifications to IST Patch Panel 
> Board_4APR19.png>_______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l