Star-fst-l mailing list

[LI YI <li.yi AT sdu.edu.cn>]

Dear Steve,

Thank you for the update! Please keep us posted next week.
If the nicomatic changes their connector, we will need to make sure
that we have the same pair for hybrid and T-board at BNL.

Btw, for connector ordering, was the pair ordered or only one type on
T-board ordered?

Thanks,
Li

On Fri, May 17, 2019 at 2:25 AM Valentino, Stephen <svalentino AT bnl.gov> wrote:
>
> Hi Li,
> We have not yet received the cables from the vendor but should have them 
> soon.  I will check the status of everything and answer all your questions 
> when I get back from vacation on Monday.
> BTW: Nicomatic may have extended height connectors in this style. I don't 
> know for sure but you may want to check.
> 6.2mm separation would maybe be ok if the T-board is stablized so no part 
> of it flexes closer than 6.2mm and we connect the cable from the other side 
> and trim the protruding wire correctly.  I have to double check this Monday.
> Steve
>
> Get Outlook for Android
>
>
>
> From: Li YI
> Sent: Thursday, May 16, 10:31 AM
> Subject: [Star-fst-l] Confirm connector type on T-board
> To: star-fst-l AT lists.bnl.gov
>
>
> Dear Steve Valentino,
>
> In order to test the whole system electronically, we plan to attach devices 
> including connectors to hybrid, and ship it to Zhenyu in UIC together with 
> T-board/cables/... from you. Therefore, we'd like to confirm with you the 
> type of connector ordered for or/and attached to T-board: A22-1-T-34-V22?
>
> Btw, how is the status of attaching device and soldering cables to T-board?
>
> Thanks,
> Li YI
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l
>
>