Star-fst-l mailing list

["Valentino, Stephen" <svalentino AT bnl.gov>]

Hi Li,

The cables should arrive Wednesday but we have not received the Nicomatic 
connectors.  The connectors are weeks late.  We emailed Nicomatic but haven't 
received a response yet.  We ordered only Nicomatic P/N A22-1-T-34-V22 which 
is the male connector for the T-Board side.

As I understand, the proposal is for the T-board to be "sandwiched" between 2 
hybrid boards leaving 6.2mm board-to-board distance on each side.  I think it 
will have enough room although this may also depend on the route of the cable 
wires as they enter the 6.2mm space between the boards relative to the 
positions of the Nicomatic connectors and large capacitors on the T-Board 
PCB.   When we receive the cables this week we will test solder one to a 
T-Board and then let you know.

Let me know if I missed any questions.

Regards,
Steve Valentino
631-344-4644

-----Original Message-----
From: LI YI <li.yi AT sdu.edu.cn> 
Sent: Friday, May 17, 2019 2:43 AM
To: Valentino, Stephen <svalentino AT bnl.gov>
Cc: star-fst-l AT lists.bnl.gov
Subject: Re: [Star-fst-l] Confirm connector type on T-board

Dear Steve and All,

Forgot to mention, the one got from Yi Yang is 6.2mm in height connector 
(Singapore branch). We are still working on communication with China mainland 
branch for ordering.

Best,
Li

On Fri, May 17, 2019 at 2:39 PM LI YI <li.yi AT sdu.edu.cn> wrote:
>
> Dear Steve,
>
> Thank you for the update! Please keep us posted next week.
> If the nicomatic changes their connector, we will need to make sure 
> that we have the same pair for hybrid and T-board at BNL.
>
> Btw, for connector ordering, was the pair ordered or only one type on 
> T-board ordered?
>
> Thanks,
> Li
>
> On Fri, May 17, 2019 at 2:25 AM Valentino, Stephen <svalentino AT bnl.gov> 
> wrote:
> >
> > Hi Li,
> > We have not yet received the cables from the vendor but should have them 
> > soon.  I will check the status of everything and answer all your 
> > questions when I get back from vacation on Monday.
> > BTW: Nicomatic may have extended height connectors in this style. I don't 
> > know for sure but you may want to check.
> > 6.2mm separation would maybe be ok if the T-board is stablized so no part 
> > of it flexes closer than 6.2mm and we connect the cable from the other 
> > side and trim the protruding wire correctly.  I have to double check this 
> > Monday.
> > Steve
> >
> > Get Outlook for Android
> >
> >
> >
> > From: Li YI
> > Sent: Thursday, May 16, 10:31 AM
> > Subject: [Star-fst-l] Confirm connector type on T-board
> > To: star-fst-l AT lists.bnl.gov
> >
> >
> > Dear Steve Valentino,
> >
> > In order to test the whole system electronically, we plan to attach 
> > devices including connectors to hybrid, and ship it to Zhenyu in UIC 
> > together with T-board/cables/... from you. Therefore, we'd like to 
> > confirm with you the type of connector ordered for or/and attached to 
> > T-board: A22-1-T-34-V22?
> >
> > Btw, how is the status of attaching device and soldering cables to 
> > T-board?
> >
> > Thanks,
> > Li YI
> > _______________________________________________
> > Star-fst-l mailing list
> > Star-fst-l AT lists.bnl.gov
> > https://lists.bnl.gov/mailman/listinfo/star-fst-l
> >
> >