Star-fst-l mailing list

[Gerard Visser <gvisser AT indiana.edu>]

hi Steve, Mike,
        It looks great to me. Thanks for taking care of this!
	As far as cable direction I guess we would want it to be going radially outward 
from the FST wedge. I don't know how that relates to T-board, Zhenyu and Jianing 
better clarify the orientation for you. I suggest not soldering more until it is 
confirmed.

                Gerard


On 5/29/2019 10:56 AM, Valentino, Stephen wrote:
> Hi Zhenyu and all,
>
> Mike C. test soldered an Inner cable to the V2 T-Board.  The wiring will fit 
> snuggly in 5.12mm so a 6.2mm height restriction should be fine.
>
> See details at the link below.
> https://drupal.star.bnl.gov/STAR/blog/steve/test-soldering-fst-inner-cable-t-board-29may19
>       
>
> In the pictures, you can see that the cable makes a right angle turn then 
> enters the T-Board on the short side nearest the via holes the cable is 
> soldered to.  When we solder up the rest of the V2 T_boards we have, from 
> which direction should the cable approach the T-Board?  Does it even matter 
> for the tests?
>
> Regards,
> Steve Valentino
> 631-344-4644
>
> -----Original Message-----
> From: Valentino, Stephen
> Sent: Tuesday, May 28, 2019 4:12 PM
> To: Valentino, Stephen <svalentino AT bnl.gov>; LI YI <li.yi AT sdu.edu.cn>; Zhenyu Ye 
> <yezhenyu2003 AT gmail.com>
> Cc: star-fst-l AT lists.bnl.gov
> Subject: RE: [Star-fst-l] Confirm connector type on T-board
>
> Hi,
>
> We received the test cables (Inner Cable for test stand setup).
>
> John H. called Nicomatic's regional sales manager, basically going around the 
> sales person he had been dealing with.  The manager said we should receive 
> the 25 connectors we ordered by the end of next week.
>
> We are test soldering the cable onto the T-Board and will let you now the 
> results.