star-fst-l AT lists.bnl.gov
Subject: Star-fst-l mailing list
List archive
Re: [Star-fst-l] T-board between two hybrids -- Would it have enough space to solder cable?
- From: Yi Yang <yiyang AT ncku.edu.tw>
- To: Aschenauer Elke-Caroline <elke AT bnl.gov>
- Cc: "star-fst-l AT lists.bnl.gov" <star-fst-l AT lists.bnl.gov>
- Subject: Re: [Star-fst-l] T-board between two hybrids -- Would it have enough space to solder cable?
- Date: Fri, 17 May 2019 20:19:52 +0800
Hi Elke,
Since we are waiting for the new locations for the APV chips, so we are planning upload the design later.
Cheers,
Yi
+++++++++++++++++++++++++++++++++++++++++++++++++++
Yi Yang, Assistant Professor
Department of Physics
National Cheng Kung University
Tainan, 701 Taiwan
E-Mail: yiyang AT ncku.edu.tw
Tel: +886-6-2757575 ext.65237
Fax: +886-6-2747995
Group Web: http://phys.ncku.edu.tw/~yiyang
+++++++++++++++++++++++++++++++++++++++++++++++++++
Yi Yang, Assistant Professor
Department of Physics
National Cheng Kung University
Tainan, 701 Taiwan
E-Mail: yiyang AT ncku.edu.tw
Tel: +886-6-2757575 ext.65237
Fax: +886-6-2747995
Group Web: http://phys.ncku.edu.tw/~yiyang
+++++++++++++++++++++++++++++++++++++++++++++++++++
On Fri, May 17, 2019 at 6:23 PM Aschenauer Elke-Caroline <elke AT bnl.gov> wrote:
_______________________________________________Dear All,can we please put all documentation on the WIKI.Thanks elkeOn May 16, 2019, at 10:29, Li YI <li.yi AT sdu.edu.cn> wrote:Dear All,
To follow the spirit of today's discussion on better documenting/more communication through emails, I would like to repeat an question during today's meeting here:
Basing on the current design (keeping T-board/hybrid design to be the same size but only moved connectors to two sides), would it be ok for cable soldiered on T-board to have enough space?
The concern was that the distance between connector and cable solder points was too close to each other and may cause difficulty when connecting T-board and hybrid with cables in the way.
The current dimensions were sent out by Jianing ten days ago and can be found at: https://drupal.star.bnl.gov/STAR/system/files/hybrid_dimension_190506.pdf
The height of a pair of nicomatic connector is 6.2mm. (Steve: Do you think it could be ok for cables?)
PS. the motivation to have connectors on two sides of the T-board, which was discussed during last week's meeting, is to disconnect and connect the connectors more easily.
Best,
Li
_______________________________________________
Star-fst-l mailing list
Star-fst-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/star-fst-l( `,_' )+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-) `\ +/ '. | Elke-Caroline Aschenauer =| `, -\,_ `-/ Brookhaven National Lab +,&&&&&V Physics Dept., 25 Corona Road =,&&&&&&&&: Bldg. 510 /2-195 Rocky Point, NY, -,&&&&&&&&&&; 20 Pennsylvania Avenue 11778 +| |&&&&&&&;\ Upton, NY 11973 =| | :_) _ Tel.: 001-631-344-4769 Tel.: 001-631-569-4290 -| | ;--' | Cell-USA: 001-757-2565224 +'--' `-.--. | Cell-Europe: +49152220025211 =\_ | |—‘ -`-._\__/ Mail: elke AT bnl.gov elke.caroline AT me.com ++=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=
Star-fst-l mailing list
Star-fst-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/star-fst-l
-
[Star-fst-l] T-board between two hybrids -- Would it have enough space to solder cable?,
Li YI, 05/16/2019
-
Re: [Star-fst-l] T-board between two hybrids -- Would it have enough space to solder cable?,
Aschenauer Elke-Caroline, 05/17/2019
- Re: [Star-fst-l] T-board between two hybrids -- Would it have enough space to solder cable?, 董家宁, 05/17/2019
- Re: [Star-fst-l] T-board between two hybrids -- Would it have enough space to solder cable?, Yi Yang, 05/17/2019
-
Re: [Star-fst-l] T-board between two hybrids -- Would it have enough space to solder cable?,
Aschenauer Elke-Caroline, 05/17/2019
Archive powered by MHonArc 2.6.24.