Star-fst-l mailing list

[Yi Yang <yiyang AT ncku.edu.tw>]

In case others are interested in this as well. 

+++++++++++++++++++++++++++++++++++++++++++++++++++
Yi Yang, Associate Professor
Department of Physics
National Cheng Kung University
Tainan, 701 Taiwan
E-Mail: yiyang AT ncku.edu.tw
Tel: +886-6-2757575 ext.65237
Fax: +886-6-2747995
Group Web: http://phys.ncku.edu.tw/~yiyang
+++++++++++++++++++++++++++++++++++++++++++++++++++

---------- Forwarded message ---------
From: Yi Yang <yiyang AT ncku.edu.tw>
Date: Tue, Nov 10, 2020 at 9:39 AM
Subject: Re: [Star-fst-l] prototype for storage box
To: Zhenyu Ye <yezhenyu2003 AT gmail.com>

Hi Zhenyu,

I checked the pins in FST-06 and they look fine to me. Please see the attached photos.

Regarding the features on MS, I am not 100% sure what Greg meant. If I understand correctly, he meant the circle pattern? If it is the case, I think both old prototype and this new module have the same pattern. I actually don’t know how to clean this up.

Cheers,

Hi

Zhenyu Ye <yezhenyu2003 AT gmail.com>於 2020年11月10日 週二，上午8:07寫道：

Yi, Please check the pins. The company which makes storage boxes has replied and said that these marks were not from them.

How about the first issue about Injection molding features?

Zhenyu

> On Nov 9, 2020, at 5:51 PM, Yi Yang <yiyang AT ncku.edu.tw> wrote:
>
> Hi  Zhenyu,
>
> Thanks a lot for the information.
> I don't think we had these marks on guide pins before.
> I will check FS-06 which is at NCKU today, and Te-Chuan, Chan-Jui and Yu-Shang will check FS-07, -08, and -09 at TiDC today.
>
> Cheers,
> Yi
>
>
> +++++++++++++++++++++++++++++++++++++++++++++++++++
> Yi Yang, Associate Professor
> Department of Physics
> National Cheng Kung University
> Tainan, 701 Taiwan
> E-Mail: yiyang AT ncku.edu.tw
> Tel: +886-6-2757575 ext.65237
> Fax: +886-6-2747995
> Group Web: http://phys.ncku.edu.tw/~yiyang
> +++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
> On Tue, Nov 10, 2020 at 6:06 AM Zhenyu Ye <yezhenyu2003 AT gmail.com> wrote:
> Hi Yi,
>
> Please find below comments from Greg at Fermilab on this prototype MS
>
> https://drupal.star.bnl.gov/STAR/system/files/Production%20Module%20MS%20-%2009%20Nov%202020%20Comments%20from%20Greg.pdf
>
> We first gave the MS to a company which makes new storage boxes, and then to Greg to check it against the module assembly tooling. I am not sure whether the marks on the pin were there before giving to the company or only after.
>
> If the former, the marks must have been made during the pin fabrication/insertion process and be there for other pins
> Xu is asking the company to see if they did something around the pin which might have created the marks.
>
> Zhenyu
>
> > On Oct 8, 2020, at 7:58 AM, Yi Yang <yiyang AT ncku.edu.tw> wrote:
> >
> > Hi Zhenyu and Xu,
> >
> > My student (Te-Chuan, Chan-Jui, and Yi-Shan) has produced a prototype for you to design the storage box and shipped it to you by DHL.
> > https://www.dhl.com/en/express/tracking.html?AWB=1943785410&brand=DHL
> >
> > Cheers,
> > Yi
> >
> > <26179.jpg>
> > <26180.jpg>
> > <26181.jpg>
> >
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > Yi Yang, Associate Professor
> > Department of Physics
> > National Cheng Kung University
> > Tainan, 701 Taiwan
> > E-Mail: yiyang AT ncku.edu.tw
> > Tel: +886-6-2757575 ext.65237
> > Fax: +886-6-2747995
> > Group Web: http://phys.ncku.edu.tw/~yiyang
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > _______________________________________________
> > Star-fst-l mailing list
> > Star-fst-l AT lists.bnl.gov
> > https://lists.bnl.gov/mailman/listinfo/star-fst-l
>

--

+++++++++++++++++++++++++++++++++++++++++++++++++++
Yi Yang, Associate Professor
Department of Physics
National Cheng Kung University
Tainan, 701 Taiwan
E-Mail: yiyang AT ncku.edu.tw
Tel: +886-6-2757575 ext.65237
Fax: +886-6-2747995
Group Web: http://phys.ncku.edu.tw/~yiyang
+++++++++++++++++++++++++++++++++++++++++++++++++++