Star-fst-l mailing list

["Ye, Zhenyu" <yezhenyu AT uic.edu>]

Hi Yi,

There is another question on the soft cooling tube (Rahul’s presentation 
slide 14):

In the drawing on the top-left corner, the (recommended) diameter for the 
tube is 6.5mm. Rahul could not find Tygon 3370 with the exact diameter from 
US suppliers. Is there a supplier from Taiwan that provides it?

Best,
Zhenyu

> On Apr 13, 2021, at 11:11 AM, Ye, Zhenyu <yezhenyu AT uic.edu> wrote:
> 
> Thanks, Yi.
> 
>> Begin forwarded message:
>> 
>> From: Yi Yang <yiyang AT ncku.edu.tw>
>> Subject: Re: FST Cooling tube connection
>> Date: April 13, 2021 at 12:37:15 AM CDT
>> To: "Ye, Zhenyu" <yezhenyu AT uic.edu>
>> Cc: "Sharma, Rahul" <rsharma AT bnl.gov>
>> 
>> Hi Zhenyu,
>> 
>> Sorry for the delayed reply. I got way too many unread emails in my box 
>> and I finally got a chance to reply to them. 
>> 
>> Yes, you are correct, the design of the connector was suggested by the 
>> vendor (see first attached file). They just suggested using a simple hose 
>> clamp to fix the tube (second attached picture). 
>> 
>> Cheers,
>> Yi
>>    
>> 
>> +++++++++++++++++++++++++++++++++++++++++++++++++++
>> Yi Yang, Associate Professor 
>> Department of Physics 
>> National Cheng Kung University 
>> Tainan, 701 Taiwan 
>> E-Mail: yiyang AT ncku.edu.tw 
>> Tel: +886-6-2757575 ext.65237 
>> Fax: +886-6-2747995
>> Group Web: 
>> https://urldefense.com/v3/__http://phys.ncku.edu.tw/*yiyang__;fg!!P4SdNyxKAPE!TJ8tnxlVLaDPwZTceOzN-MZ5nMXutNcMTjytu99GeRxDbQBeur-jfCTNwunaL5ZsTz5qOj0$
>>   
>> +++++++++++++++++++++++++++++++++++++++++++++++++++
>> 
>> 
>> On Wed, Apr 7, 2021 at 12:57 AM Ye, Zhenyu <yezhenyu AT uic.edu> wrote:
>> Hi Yi,
>> 
>> We are wondering how to reliably attach soft flex tube with the stainless 
>> steel cooling tube embedded in the detector module. I recall we discussed 
>> it in a meeting a couple of months ago. Rahul commented that the kind of 
>> the connector end of the stainless steel cooling tube is not typical, and 
>> you said the connector design was recommended by the vendor (correct me if 
>> I remember it incorrectly).
>> 
>> Does the vendor have a recommendation on how to attach flex tube? Can you 
>> please ask them? If they have a specific recommended clamp/method to do, 
>> it will be helpful.
>> 
>> Best
>> Zhenyu
> <pic.jpeg>
> 
> <connector_design.pdf>_______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l