star-fst-l AT lists.bnl.gov
Subject: Star-fst-l mailing list
List archive
Re: [Star-fst-l] Patch Panel Assemblies Status Updates
- From: "Capotosto, Michael" <capotosto AT bnl.gov>
- To: "Ye, Zhenyu" <yezhenyu AT uic.edu>
- Cc: Star-fst L <star-fst-l AT lists.bnl.gov>
- Subject: Re: [Star-fst-l] Patch Panel Assemblies Status Updates
- Date: Wed, 12 May 2021 17:51:42 +0000
Hey Zhenyu, Gerard,
We have 36 PPBs installed on 3 assemblies, 9 spares in the cabinet at 1006.
I've attached the updated spreadsheet with all the voltages.
-----Original Message-----
From: Ye, Zhenyu <yezhenyu AT uic.edu>
Sent: Monday, May 10, 2021 10:02 PM
To: Capotosto, Michael <capotosto AT bnl.gov>
Cc: Gerard Visser <gvisser AT indiana.edu>; Star-fst L <star-fst-l AT lists.bnl.gov>
Subject: Re: [Star-fst-l] Patch Panel Assemblies Status Updates
Hi Mike,
Thanks for the update. How many PPBs do we have in total?
Zhenyu
> On May 10, 2021, at 7:34 PM, Capotosto, Michael <capotosto AT bnl.gov> wrote:
>
> Hey everyone,
>
> Just a quick status update regarding Patch Panel Assemblies.
>
> I’ve tested two full patch panel assemblies and found no issues. I’ve left
> them in the iTPC test lab for now – if needed they’re free to be used for
> the test stand in the clean room.
>
> The third patch panel assembly, “PPB Assembly 4” is the unit we scavenged
> boards off of to send out for the various test stands. I’ve repaired two
> PPBs I had that were not working, as noted and installed them on this unit.
> I plan to grab two more PPBs from the closet at the STAR hall tomorrow, to
> be tested/repaired and installed to make 3 complete assemblies.
>
> Gerard, Please have a look at the values – the only one that sticks out to
> me is PPB Assembly 4 board 3, which has a positive output of 1.268V – I’m
> not sure what the nominal output (1.25V?) and tolerance is, so please let
> me know if this needs any further investigation. The rest all look to be
> within the same range, but I’d appreciate a second set of eyes.
>
> Test data is attached so far.
>
> The test being carried out is supplying an input +/-1.70VDC in, and
> measuring output with a 1.5R load on each positive and negative rails.
>
> Thanks,
>
> Mike Capotosto
> <Patch Panel Assembly Test
> Data.xlsx>_______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l
Attachment:
Patch Panel Assembly Test Data.xlsx
Description: Patch Panel Assembly Test Data.xlsx
-
[Star-fst-l] Patch Panel Assemblies Status Updates,
Capotosto, Michael, 05/10/2021
-
Re: [Star-fst-l] Patch Panel Assemblies Status Updates,
Ye, Zhenyu, 05/10/2021
- Re: [Star-fst-l] Patch Panel Assemblies Status Updates, Capotosto, Michael, 05/12/2021
-
Re: [Star-fst-l] Patch Panel Assemblies Status Updates,
Ye, Zhenyu, 05/10/2021
Archive powered by MHonArc 2.6.24.