Skip to Content.
Sympa Menu

star-fwd-software-l - Re: [[Star-fwd-software-l] ] BTOF and dE/dx Calibration production of Run 22 pp500

star-fwd-software-l AT lists.bnl.gov

Subject: FWD Software

List archive

Chronological Thread  
  • From: "Van Buren, Gene" <gene AT bnl.gov>
  • To: "star-fwd-software-l AT lists.bnl.gov" <star-fwd-software-l AT lists.bnl.gov>
  • Subject: Re: [[Star-fwd-software-l] ] BTOF and dE/dx Calibration production of Run 22 pp500
  • Date: Fri, 31 Jan 2025 19:38:14 +0000

Hi,

No response on this, so I moved on.

-Gene

> On Jan 27, 2025, at 3:42 PM, Van Buren, Gene <gene AT bnl.gov> wrote:
>
> Hi, forward software folks
>
> I am preparing a calibration production of Run 22 pp500 data for BTOF and
> TPC dE/dx in the SL24b library. The plan for this is to only process a
> single st_physics DAQ file from each of 3280 runs from the
> production_pp500_2022 trigger setup. I do not think we should discuss
> opening up what the dataset is that is to be processed for this (that could
> be a separate production), but I do want to ask here whether there is any
> benefit to you to running any forward subsystem reconstruction codes in
> this SL24b production. We don't get a free lunch for doing so as there is a
> reconstruction time penalty to include some of those codes, but I actually
> don't know what that penalty is at now. I also understand that there's been
> a good bit of code development that is not yet in SL24b, so it may not be
> worthwhile to do anything with the older codes that are in SL4b.
>
> Please get back to me ASAP on this as I don't want to hold up the
> calibration work for long.
>
> Thanks,
> -Gene




Archive powered by MHonArc 2.6.24.

Top of Page