sphenix-emcal-l AT lists.bnl.gov

Subject: sPHENIX EMCal discussion

List archive

[Sphenix-emcal-l] EMCal Sector 0 dryfit blocks

From: Sean Stoll <stoll AT bnl.gov>
To: "Lenz, Michael D" <mlenz AT bnl.gov>, labounty AT bnl.gov, Bill Lenz <wlenz AT bnl.gov>, sphenix-emcal-l AT lists.bnl.gov
Subject: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks
Date: Fri, 17 May 2019 16:33:22 -0400

All,

We did a dryfit of Sector 0 with 96 blocks this afternoon.

(A few of the blocks had wet optical couplant, so we used some spares for the photo.)

I think all looks good. We are still waiting on the survey numbers for the sawteeth. So maybe we want to hold off on epoxying things in place until we see those, but we didn't see any obvious problems with the fitting that would indicate significant dimensional issues.

"Good work" to all who contributed to the effort.

Sean

--
Sean Stoll
Physics Associate
Brookhaven Nat. Lab
Upton, NY 11973
631.344.5331

Attachment: IMG_0810.JPG
Description: JPEG image

Attachment: IMG_0808.JPG
Description: JPEG image

Attachment: IMG_0799.JPG
Description: JPEG image

Attachment: IMG_0796.JPG
Description: JPEG image

Attachment: IMG_0795.JPG
Description: JPEG image

Attachment: IMG_0794.JPG
Description: JPEG image

Attachment: IMG_0790.JPG
Description: JPEG image

Attachment: IMG_0787.JPG
Description: JPEG image

[Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, Sean Stoll, 05/17/2019
- [Sphenix-emcal-l] Fwd: EMCal Sector 0 dryfit blocks, Sean Stoll, 05/17/2019
- Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, David Morrison, 05/20/2019
  - Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, Sickles, Anne M, 05/20/2019
    - Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, Michael Lenz, 05/20/2019
      - Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, Ilardo, Matthew, 05/20/2019
- <Possible follow-up(s)>
- Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, eric thorsland, 05/20/2019