sphenix-emcal-l AT lists.bnl.gov

Subject: sPHENIX EMCal discussion

List archive

Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks

From: David Morrison <morrison AT bnl.gov>
To: Sean Stoll <stoll AT bnl.gov>, "Lenz, Michael D" <mlenz AT bnl.gov>, labounty AT bnl.gov, Bill Lenz <wlenz AT bnl.gov>, sphenix-emcal-l AT lists.bnl.gov
Subject: Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks
Date: Mon, 20 May 2019 09:36:33 -0400

That looks fantastic!

Dave

On 5/17/19 4:33 PM, Sean Stoll wrote:
> All,
>
> We did a dryfit of Sector 0 with 96 blocks this afternoon.
>
> (A few of the blocks had wet optical couplant, so we used some spares
> for the photo.)
>
> I think all looks good. We are still waiting on the survey numbers for
> the sawteeth. So maybe we want to hold off on epoxying things in place
> until we see those, but we didn't see any obvious problems with the
> fitting that would indicate significant dimensional issues.
>
> "Good work" to all who contributed to the effort.
>
> Sean

--
David Morrison Brookhaven National Laboratory phone: 631-344-5840
Physics Department, Bldg 510 C fax: 631-344-3253
Upton, NY 11973-5000 email: dave AT bnl.gov

[Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, Sean Stoll, 05/17/2019
- [Sphenix-emcal-l] Fwd: EMCal Sector 0 dryfit blocks, Sean Stoll, 05/17/2019
- Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, David Morrison, 05/20/2019
  - Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, Sickles, Anne M, 05/20/2019
    - Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, Michael Lenz, 05/20/2019
      - Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, Ilardo, Matthew, 05/20/2019
- <Possible follow-up(s)>
- Re: [Sphenix-emcal-l] EMCal Sector 0 dryfit blocks, eric thorsland, 05/20/2019