sphenix-hcal-l AT lists.bnl.gov

Subject: sPHENIX HCal discussion

List archive

Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug

From: "Boose, Stephen" <boose AT bnl.gov>
To: "Kistenev, Edouard" <kistenev AT bnl.gov>, "Ruggiero, Richard" <ruggiero AT bnl.gov>
Cc: "sphenix-hcal-l AT lists.bnl.gov" <sphenix-hcal-l AT lists.bnl.gov>
Subject: Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug
Date: Tue, 6 Aug 2019 11:44:41 +0000

Edward,

I guess the only issue with discarding the existing plugs for Modules1-6 is that the diffusers are glued in, so that’s about $600 lost in diffusers. Aside from that this new design will obviously fix a couple of issues with assembly and save some effort.

Steve Boose

sPHENIX Experiment

Brookhaven National Laboratory

BLDG 510C

Upton, NY 11973

Phone: (631) 344-2897

From: sPHENIX-HCal-l <sphenix-hcal-l-bounces AT lists.bnl.gov> On Behalf Of kistenev AT bnl.gov
Sent: Monday, August 05, 2019 4:39 PM
To: Ruggiero, Richard <ruggiero AT bnl.gov>
Cc: sphenix-hcal-l AT lists.bnl.gov
Subject: Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug

Richie,

I suggest to ask Xiaochun to contact Uniplast to get plug modifications immediately approved. I will not be surprised to learn that all plugs are already produced and ready for shipment (UNIPLAST is constrained by completion date only).

And the question to Steve / Sal - plugs for the first 6 sectors - are you planning to replace those with new ones (no problems doing it - all what we need is to ask for early delivery and delay connecting bundles until that time). For reasons which are already obscured contract asks for 1000 of those plugs, 400 saltshakers and 275 fiber bundles - plugs shell be plenty for the whole calorimeter.

Edward

On Aug 5, 2019, at 3:59 PM, Ruggiero, Richard <ruggiero AT bnl.gov> wrote:

Hi All,

I’ve made a few changes to the Fiber Plug detail (see attached drawings). I added a step for the fiber ferule to be inserted to the proper distance from the diffuser. I also decreased the diameter of the diffuser counter bore to give Sal an easier time gluing them in place. Comments? Suggestions?

Rich

<205-0150-0040-Fiber Plug.pdf><205-0150-0037-Fiber Bundle Assembly.pdf>_______________________________________________
sPHENIX-HCal-l mailing list
sPHENIX-HCal-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-hcal-l

[Sphenix-hcal-l] Proposed Changes to Fiber Plug, Ruggiero, Richard, 08/05/2019
- Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug, kistenev, 08/05/2019
  - Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug, Boose, Stephen, 08/06/2019
    - Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug, Eric Mannel, 08/06/2019
      - Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug, Stefan Bathe, 08/06/2019
      - Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug, Lajoie, John G [PHYSA], 08/07/2019
- Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug, Lajoie, John G [PHYSA], 08/08/2019
  - Re: [Sphenix-hcal-l] Proposed Changes to Fiber Plug, Stefan Bathe, 08/08/2019