sphenix-magnet-l AT lists.bnl.gov
Subject: sPHENIX discussion of the superconducting solenoid
List archive
- From: "Yip, Kin" <kinyip AT bnl.gov>
- To: "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
- Cc: "Zapasek, Ronald J" <zapasek AT bnl.gov>
- Subject: Re: [Sphenix-magnet-l] cable
- Date: Thu, 19 May 2022 15:18:55 +0000
Hi,
I found Ron and took the roll of cables from 1005S building (that Ron confirmed with me that it’s the right one). I drove with it to 1008 and found Frank Toldo who helped put the roll of cable under the same table that he’s put your voltage tap (a bigger roll), since it’s too big to put it in the cabinet in 1008 trailer.
I have attached the picture of proof.
Kin
From: Schultheiss, Carl <carls AT bnl.gov>
Roger that.
Carl
From: Yip, Kin <kinyip AT bnl.gov>
Hi,
Let me do the “delivery”. I haven’t been able to find Ron Zapasek yet. When I found Ron, I’ll take the cable and put it in the trailer in 1008.
Kin
From: Schultheiss, Carl <carls AT bnl.gov>
Hi Ron,
Thanks, the cable should be delivered to Frank Toldo at 1008IR. There is a trailer right at the first entrance, the sPhenix storage room is there.
Frank, This cable is for the crash buttons, it should be stored with them, if possible.
Carl Schultheiss Brookhaven National Laboratory Principal Electrical Engineer (631) 344-2504
From: Zapasek, Ronald J <zapasek AT bnl.gov>
Carl, your cable was delivered to bnl yesterday. Soon as I get it we can move it to wherever you want.
Ron Zapasek Brookhaven National Laboratory Bldg 911A Upton , NY 11973 office 631 344 2189 cell 631 804 4588 fax 631 344 4125
|
Attachment:
20220519_105140.jpg
Description: 20220519_105140.jpg
- Re: [Sphenix-magnet-l] cable, Yip, Kin, 05/19/2022
Archive powered by MHonArc 2.6.24.