sPHENIX discussion of the superconducting solenoid

["Yip, Kin" <kinyip AT bnl.gov>]

Hello, Carl,

Ray and his colleagues have finished removing the restraints at the bottom.  He will come back tomorrow morning to remove the restraint in the middle of the Valve box , using a ladder.

So late morning or afternoon, you can do your hippy.

Kin

-------- Original message --------

From: "Yip, Kin" <kinyip AT bnl.gov>

Date: 7/13/22 2:57 PM (GMT-05:00)

To: "Schultheiss, Carl" <carls AT bnl.gov>, sphenix-magnet-l AT lists.bnl.gov

Subject: RE: [Sphenix-magnet-l] 1:30 pm ... and sequence of works

Hi,

Ray and his Magnet Div. colleagues just started to take off the can .  See the picture.  I am not sure when he Will finish remove all the restraints.  I will let you know.  Tomorrow is a good time for you !

Kin

-------- Original message --------

From: "Schultheiss, Carl" <carls AT bnl.gov>

Date: 7/13/22 2:13 PM (GMT-05:00)

To: "Yip, Kin" <kinyip AT bnl.gov>, sphenix-magnet-l AT lists.bnl.gov

Subject: Re: [Sphenix-magnet-l] 1:30 pm ... and sequence of works

When will Ray start? I won't be available this afternoon. Tomorrow I will be available all day. 

Carl

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android

---

From: sPHENIX-magnet-l <sphenix-magnet-l-bounces AT lists.bnl.gov> on behalf of Kin Yip <kinyip AT bnl.gov>
Sent: Wednesday, July 13, 2022 1:17:54 PM
To: sphenix-magnet-l AT lists.bnl.gov <sphenix-magnet-l AT lists.bnl.gov>
Subject: Re: [Sphenix-magnet-l] 1:30 pm ... and sequence of works

 

Typo:

> 4. Ray will do another hipot (as he insists) afterwards.

"Ray will do another hipot ..."   should be   "Carl will do another hipot..." :-)

Kin

On 7/13/22 12:45, Yip, Kin wrote:

Dear Ray,

 

As I chatted with you 15 minutes ago, the Valvebox should hopefully arrive at 1008 at 1:30 pm (after they start transporting it after lunch ~ 1 pm).

 

Just to make sure (as saying once is never enough),  the sequence of works is that:

 

1. Ray will take off all the restraints, underneath as well as inside the Valvebox ;
2. Carl Schultheiss will do a hipot  ;
3. Ray will install the heat shield/multi-layer-insulation and then close the door (with the help of Frank’s guy as the door is heavy) on the side which inaccessible on the platform (as it opens to the air);
4. Ray will do another hipot (as he insists) afterwards.
   
   

Kin

 

PS:

 

Rigger Peter needed to take off a valve-like object to make sure that the valvebox can leave 912 without hitting anything.  I took a photo and that object

was on the 2^nd vertical column from the right.  I gave it to Chintan Sheth ~45 minutes ago.

 

 

From: Yip, Kin
Sent: Wednesday, July 13, 2022 10:34 AM
To: Orfin, Paul <porfin AT bnl.gov>; Chintan Sheth <csheth AT bnl.gov>; O'Connor, Eric <eoconnor1 AT bnl.gov>
Subject: A small piece taken off

 

Hi,

 

They have taken a small piece of your pipe/valve of the Valvebox.  It's from the 2nd vertical pipe in the photo and that piece is held in Frank's hand in the photo.

 

I am holding on to it myself at this moment.

 

Kin

 

_______________________________________________
sPHENIX-magnet-l mailing list
sPHENIX-magnet-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-magnet-l

Attachment: 20220713_144930.jpg
Description: 20220713_144930.jpg