sPHENIX MAPS tracker discussion

[Ming Liu <ming AT bnl.gov>]

Hi Martin,
Very nice, thanks!

We could try it next week, just hooked up our telescope today.

Cheers,
Ming 

----- 


Dr. Ming Xiong Liu 
P-3, MS H846 
Physics Division 

Office: 505.667.7125 
Mobile: 505.412.7396 
Los Alamos National Laboratory 





On 1/6/23, 4:38 PM, "sPHENIX-MAPS-l on behalf of Martin Purschke via 
sPHENIX-MAPS-l" <sphenix-maps-l-bounces AT lists.bnl.gov 
<mailto:sphenix-maps-l-bounces AT lists.bnl.gov> on behalf of 
sphenix-maps-l AT lists.bnl.gov <mailto:sphenix-maps-l AT lists.bnl.gov>> wrote:


All, (cc'ing the DAQ list b/c of mutual interest/awareness, sorry that 
some of you get this twice)




As we discussed briefly in Thursday's MVTX meeting, I hooked up the 
current MVTX-dedicated GL1/GTM to the FELIX in EBDC11.


Please refer to our Oct 26 discussion about the fiber distribution from 
the GL1/GTMs: https://indico.bnl.gov/event/17586/ 
<https://indico.bnl.gov/event/17586/>


To document today's work, I made a derivative document and (rather than 
spamming two lists with MBs of pictures) uploaded it to that same 
meeting in indico:


https://indico.bnl.gov/event/17586/attachments/44026/76602/MVTX_GTM_hookup.pdf
 
<https://indico.bnl.gov/event/17586/attachments/44026/76602/MVTX_GTM_hookup.pdf>


The TL;DR is:


- the MVTX GTM minipod is hooked up to the FELIX, as is the busy return
- the physical "fibering" is made exactly as we agreed on in October 
with the 2x12 MPO -> 24 LC breakout cassette
- Jo, Joe, Yasser and I can now take it from there. It is unlikely to 
come alive just on the first try. But all hardware is in place.


Have fun, and a good weekend!


Martin






On 12/28/22 18:43, Martin Purschke via sPHENIX-MAPS-l wrote:
> Dear all,
> 
> as I advertised at the coll. meeting, several detector systems can set 
> up their own GL1/GTM unit during the commissioning phase.
> 
> In order to decouple the digitizer operations (that currently require a 
> good amount of rebooting and re-configuring) from you guys, I rigged up 
> a 2nd unit in the rack next to ebdc11. I used the spare 2nd ethernet 
> port on ebcd11 to hook it up as mvtxgtm (aka 192.168.60.125) so once 
> RunControl is running on the box it can get to it. (We don't want the 
> units to be seen on the DAQ network for now).
> 
> I'm running out of time today; eventually we can join the existing 
> daq01-connected 192.168.60.x network where the other units live with 
> this one (IPs already set accordingly) and gain a gateway and DNS. And 
> the unit still needs to see a bit of TLC with firmware versions and so on.
> 
> No fibers are connected yet and nothing has changed with any of your 
> fibers yet; I'll coordinate with Jo and Yasser. But when we are done, 
> each group can do their own thing without interference from the other.
> 
> Best,
> Martin
> 
> 
> 
> _______________________________________________
> sPHENIX-MAPS-l mailing list
> sPHENIX-MAPS-l AT lists.bnl.gov <mailto:sPHENIX-MAPS-l AT lists.bnl.gov>
> https://lists.bnl.gov/mailman/listinfo/sphenix-maps-l 
> <https://lists.bnl.gov/mailman/listinfo/sphenix-maps-l>




-- 
Martin L. Purschke, Ph.D. ; purschke AT bnl.gov <mailto:purschke AT bnl.gov>
; http://www.phenix.bnl.gov/~purschke <http://www.phenix.bnl.gov/~purschke>
;
Brookhaven National Laboratory ; phone: +1-631-344-5244
Physics Department Bldg 510 C ; fax: +1-631-344-3253
Upton, NY 11973-5000 ; skype: mpurschke
-----------------------------------------------------------------------
_______________________________________________
sPHENIX-MAPS-l mailing list
sPHENIX-MAPS-l AT lists.bnl.gov <mailto:sPHENIX-MAPS-l AT lists.bnl.gov>
https://lists.bnl.gov/mailman/listinfo/sphenix-maps-l 
<https://lists.bnl.gov/mailman/listinfo/sphenix-maps-l>