Commissioning and running of sPHENIX

["Yip, Kin" <kinyip AT bnl.gov>]

 

 

From: Franco, Anthony <afranco AT bnl.gov>
Sent: Tuesday, January 2, 2024 10:01 AM
To: Hillis, Darren <dhillis AT bnl.gov>; Yip, Kin <kinyip AT bnl.gov>; Sampson, Paul <sampson AT bnl.gov>; Marr, Gregory <gmarr AT bnl.gov>; Bathe, Stefan <bathe AT bnl.gov>; Vasquez, Joel <jvasquez AT bnl.gov>; Toldo, Frank A <fatoldo AT bnl.gov>; Pisani, Robert <pisani AT bnl.gov>; Albanese, Marianna <malbanese AT bnl.gov>; Mills, James A <mills AT bnl.gov>
Cc: Access Controls Group <accesscontrols AT bnl.gov>; Reich, Jonathan <reich AT bnl.gov>; Benante, John T <benante AT bnl.gov>; Giorgio, Caitlin <charper AT bnl.gov>; Fliller, Raymond <rfliller AT bnl.gov>; Craner, Francis <fcraner AT bnl.gov>
Subject: RE: Work in ODH Service Buildings - 1002B, 1004B, 1006B, 1008B, 1010A and 1012A.

 

Hello,

 

I am planning on downloading 6 O’clock PLC code this afternoon at 12:00PM during lunch. This will send the entire RHIC Ring to SA Mode and if all goes well I should be able to have it back in RA Mode by 1:00PM. If anyone has any reason why I should not do this please let me know, thanks.

 

I will also call the following before I download:

Notify sPHENIX Control Room Shift Supervisor at x7815

Notify 911MCR Control Room Personnel at x4662

Notify CAS Support at x2024

Notify Kin Yip @ x 4116

Notify Frank Toldo @ x7788

 

Thanks,

Anthony

 

From: Hillis, Darren
Sent: Saturday, December 23, 2023 7:21 AM
To: Yip, Kin <kinyip AT bnl.gov>; Sampson, Paul <sampson AT bnl.gov>; Marr, Gregory <gmarr AT bnl.gov>; Bathe, Stefan <bathe AT bnl.gov>; Vasquez, Joel <jvasquez AT bnl.gov>; Reich, Jonathan <reich AT bnl.gov>; Toldo, Frank A <fatoldo AT bnl.gov>; Pisani, Robert <pisani AT bnl.gov>; Albanese, Marianna <malbanese AT bnl.gov>
Cc: Access Controls Group <accesscontrols AT bnl.gov>; Reich, Jonathan <reich AT bnl.gov>; Benante, John T <benante AT bnl.gov>; Giorgio, Caitlin <charper AT bnl.gov>; Fliller, Raymond <rfliller AT bnl.gov>; Craner, Francis <fcraner AT bnl.gov>
Subject: RE: Work in ODH Service Buildings - 1002B, 1004B, 1006B, 1008B, 1010A and 1012A.

 

All,

 

Today Access Controls Technicians will be working in 1002B, 1004B and 1008B. In 1008B the initial requirement for “Scrubbing” is complete however we have Air Flow sensors that are required for the first of February and we will be hooking up those cables today in a effort to lesson impact next week. The work in 1002B, 1004B, 1006B, 1010A and 1012A will continue for the next month plus every day (except Christmas and New Year’s Day) for the new ODH Indicators. There is not an anticipate effect on mode, ODH alarms or any functions within 1008IR, but there is always this possibility when work is being performed. There is not an anticipate effect on mode, ODH alarms or any functions within the RHIC Ring or Service Buildings, but there is always this possibility when work is being performed.. If we know something happen on our end we will call to inform.

 

I will also call all the following, every morning for the next month, as well as in the afternoon when shift changes:

             Notify sPHENIX Control Room Shift Supervisor at x7815

Notify 911MCR Control Room Personnel at x4662

Notify CAS Support at x2024

            Notify Kin Yip @ x 4116

            Notify Frank Toldo @ x7788

 

Thanks,

 

 

Darren Hillis

Access Controls Group

Collider-Accelerator Department

Brookhaven National Laboratory

Upton, NY 11973 USA

W(631)344-5849

Cell(631)742-5081

dhillis AT bnl.gov