sPHENIX discussion of software

["Frantz, Justin" <frantz AT ohio.edu>]

Hi Maya and INTT folks,

Just for completeness are there any slides (pictures) and info about the cooling water pipe location, and while we're at it, maybe if there are any other major "veins" of cabling that may not also be in GEANT...sorry for being lazy to look up pictures but maybe you all could find the best ones for this quicker...

Thanks!

-Justin

 ---------------------------------------------- 

Justin Frantz, Ph. D.  he 

RHIC UEC/Diversity Working Group 

Brookhaven National Lab, sPHENIX Experiment 

Associate Professor 

Ohio University Dept. Of Physics and Astronomy    

frantz AT ohio.edu    

646-228-2539   

PERSONAL ZOOM MEETING:  369-910-7530   Password:  1   

https://us02web.zoom.us/j/3699107530?pwd=TkZLeU1MY2d5eUpqeTJ5WUJTRHlVUT09

 

---

From: sPHENIX-software-l <sphenix-software-l-bounces AT lists.bnl.gov> on behalf of shimomuramaya via sPHENIX-software-l <sphenix-software-l AT lists.bnl.gov>
Sent: Thursday, February 1, 2024 8:04 PM
To: sphenix-software-l AT lists.bnl.gov <sphenix-software-l AT lists.bnl.gov>
Cc: Sphenix-intt L <sphenix-intt-l AT lists.bnl.gov>
Subject: [External] [Sphenix-software-l] Which part of INTT is included in sPHENIX GEANT4.

 

Use caution with links and attachments.

Dear Chris and others,

Last Tuesday at sPHENIX software and simulation meeting (https://indico.bnl.gov/event/21969/), INTT team was asked if the support structure of INTT is already in sPHENIX GEANT4 or not.

The support structures for INTT have been already |eta| <1.1 in GEANT as Genki presented in the same meeting two years ago.

Here is the indico and his presentation.
https://indico.bnl.gov/event/10544/
https://indico.bnl.gov/event/10544/contributions/58083/attachments/38823/64219/20211214_Geant4_INTT.pdf

As you can see in the slide, support structures are in and the materials are carbon (CFRP).

I confirmed the above and the following with Genki, who implemented these.

- cooling water and cooling tube which are at |eta|>1.1 are not implemented.
- the cylinder which has the same amount of the material as bus-extender has is implemented.

Therefore, most of the material related to INTT in the sPHENIX acceptance (|eta| <1.1) is already implemented.

Best regards,

Maya on behalf of INTT

###################
Associate Professor
Division of Natural Sciences
Nara Women's University

BNL Bldg.510C Room2-223

Email: maya AT cc.nara-wu.ac.jp
Office: 631-344-2778
Cell : 631-504-2144
###################

_______________________________________________
sPHENIX-software-l mailing list
sPHENIX-software-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-software-l