Skip to Content.
Sympa Menu

star-fcv-l - Re: [Star-fcv-l] STAR presentation by Ashik Ikbal Sheikh for ICNFP 2021 submitted for review

star-fcv-l AT lists.bnl.gov

Subject: STAR Flow, Chirality and Vorticity PWG

List archive

Chronological Thread  
  • From: ASHIK IKBAL <ashikhep AT gmail.com>
  • To: Prithwish Tribedy <ptribedy AT rcf.rhic.bnl.gov>, "STAR Flow, Chirality and Vorticity PWG" <star-fcv-l AT lists.bnl.gov>
  • Subject: Re: [Star-fcv-l] STAR presentation by Ashik Ikbal Sheikh for ICNFP 2021 submitted for review
  • Date: Wed, 18 Aug 2021 16:21:32 -0400

Dear Prithwish,
 
Thanks for your nice set of comments. I have implemented them all in the new version. Please have a look: https://drupal.star.bnl.gov/STAR/system/files/icnfp21_slides_ashik_ver2.pdf

Plots for preliminary request: https://drupal.star.bnl.gov/STAR/system/files/plot_prelim_request_ashik_icnfp2021.pdf

Thanks,
Ashik

On Tue, Aug 17, 2021 at 10:48 PM Prithwish Tribedy via Star-fcv-l <star-fcv-l AT lists.bnl.gov> wrote:
Hi Ashik,
   Nice slides, here are my comments with these included I sign-off.

General comments:
1. Please point us to the link to plots that require  preliminary
approval.
2. You have plots with "STAR, Au+Au.." and "STAR Preliminary" both
written as labels. I suggest you convert "STAR," to "STAR Preliminary,
Au+Au.." and remove the extra "STAR Preliminary" labels.
3. Be consistent about using "EM field" and "EM-Field".

Here are slide specific comments:

slide#2:
"First harmonic coefficient, v1, Fourier decomposition - Directed Flow"
-->
"First harmonic coefficient of Fourier decomposition v1 -> Directed
Flow"

slide#2:
"What does drive the splitting" -> "What drives the splitting"

slide#3 title:
"EM field driven splitting (Δv1)? (1)" -- the number (1) is it needed ?

slide#3:
Remove either of "Beam direction is zˆ" and "Collisions along z-axis",
they both make the same point.

slide#4:
Normally we refer reaction plane as Ψ_RP. B \perp to RP is approximate,
they are definitely correlated. Make sure you explain it, at least
during the talk.

slide#5 and 6 titles: instead of using numbers (3) or (4) you can just
write Faraday or Hall effects.

slide#7:
Are you missing Coulomb effects?

slide#8:
"Towards measurements: STAR detector at BES-II"
->
"Measurement from STAR"

slide#8:
Add 2.1<|η|<5.1 for EPD and |η|>6.3 for ZDCs.

slide#8:
In "Data sets" mention the years.

slide#9:
Remove at BES-II from the title.

slide#10:
Please add a sentence about the diagram on this slide.

slide#11:
Maybe it's a good idea to bring the equations from previous slides here.

slide#12:
Maybe write we obtain seven independent equations. The texts in bullet
below the table somehow looks smaller.

slide#15:
I think the four panel plot will be better showing 200 and 27 GeV
separately for the talk.

Best,
Prithwish




On 2021-08-14 12:55, webmaster--- via Star-fcv-l wrote:
> Dear star-fcv-l AT lists.bnl.gov members,
>
> Ashik Ikbal Sheikh (ashikhep AT gmail.com) has submitted a material for a
> review, please have a look:
> https://drupal.star.bnl.gov/STAR/node/56024
>
> ---
> If you have any problems with the review process, please contact
> webmaster AT www.star.bnl.gov
> _______________________________________________
> Star-fcv-l mailing list
> Star-fcv-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fcv-l
_______________________________________________
Star-fcv-l mailing list
Star-fcv-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/star-fcv-l


--
Ashik Ikbal
Research Associate
Kent State University
Department Of Physics
Kent, OH 44242, USA
Contact no.s: +1 631-504-7647 (USA)
                      +91 8250216234 (India)
Alternate e-mails: asheikh2 AT kent.edu
                             ashik AT rcf.rhic.bnl.gov
                             ashik.ikbal.sheikh AT cern.ch



Archive powered by MHonArc 2.6.24.

Top of Page