star-fst-l AT lists.bnl.gov
Subject: Star-fst-l mailing list
List archive
Re: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back Distance at T-Board
- From: "Valentino, Stephen" <svalentino AT bnl.gov>
- To: "star-fst-l AT lists.bnl.gov" <star-fst-l AT lists.bnl.gov>
- Subject: Re: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back Distance at T-Board
- Date: Tue, 19 Mar 2019 14:36:17 +0000
Hi Jianing,
The attached picture shows the dimension I am asking for. Mike Capotosto
built this sample for us.
The wire will be stripped 6mm and tinned. As you mention, the redundant
piece of wire can be cut after soldering.
Regards,
Steve Valentino
631-344-4644
-----Original Message-----
From: Star-fst-l <star-fst-l-bounces AT lists.bnl.gov> On Behalf Of ???
Sent: Tuesday, March 19, 2019 9:07 AM
To: star-fst-l AT lists.bnl.gov
Subject: Re: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back
Distance at T-Board
Hi Steve,
Do you mean the metal cable soldered to the T-Board? If yes, usually the
stripping length is about 1 - 2 mm. Since the T-Board thickness is 1.2 mm, I
think 2 mm should be enough, and redundant part can be cut off after fixed.
Let me know if you have any concerns.
Best,
Jianing
> -----Original Messages-----
> From: "Valentino, Stephen" <svalentino AT bnl.gov> Sent Time: 2019-03-18
> 23:21:34 (Monday)
> To: "star-fst-l AT lists.bnl.gov" <star-fst-l AT lists.bnl.gov>
> Cc:
> Subject: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back
> Distance at T-Board
>
> Hi Li,
>
> We are building a sample of the prototype inner cable for testing and there
> is one last detail we need to know.
>
> On the T-Board end, how much of the cable outer jacket should be stripped
> back?
> I think this will depend on the plan for securing the cable and also the
> layout of the vias on the T-Board.
>
> We can always modify it to fit later, but it would be good to have a value
> for the vendor to use while building the 10 prototype test cables.
>
> Regards,
> Steve Valentino
> 631-344-4644
>
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l
_______________________________________________
Star-fst-l mailing list
Star-fst-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/star-fst-l
Attachment:
FST_Inner_Cable_for_test_stand_Preliminary_19MAR19.png
Description: FST_Inner_Cable_for_test_stand_Preliminary_19MAR19.png
-
[Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back Distance at T-Board,
Valentino, Stephen, 03/18/2019
-
Re: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back Distance at T-Board,
董家宁, 03/19/2019
-
Re: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back Distance at T-Board,
Valentino, Stephen, 03/19/2019
- Re: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back Distance at T-Board, Gerard Visser, 03/19/2019
-
Re: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back Distance at T-Board,
Valentino, Stephen, 03/19/2019
-
Re: [Star-fst-l] Inner Cable Test Prototype Jacket Strip-Back Distance at T-Board,
董家宁, 03/19/2019
Archive powered by MHonArc 2.6.24.