Star-fst-l mailing list

[Yi Yang <yiyang AT ncku.edu.tw>]

Hi Zhenyu,

Thanks a lot for the feedback, we will discuss the possible reason for this shifting. 

My first guess is the mismatch of the CAD files. We will get it back to you later. 

Cheers,

Yi

+++++++++++++++++++++++++++++++++++++++++++++++++++
Yi Yang, Associate Professor
Department of Physics
National Cheng Kung University
Tainan, 701 Taiwan
E-Mail: yiyang AT ncku.edu.tw
Tel: +886-6-2757575 ext.65237
Fax: +886-6-2747995
Group Web: http://phys.ncku.edu.tw/~yiyang
+++++++++++++++++++++++++++++++++++++++++++++++++++

On Thu, Jul 2, 2020 at 11:50 PM Zhenyu Ye <yezhenyu2003 AT gmail.com> wrote:

> On Jul 2, 2020, at 2:40 AM, Yi Yang <yiyang AT ncku.edu.tw> wrote:
>
> Hi Zhenyu,
>
> It is good news. Thanks for the update.
>
> Could you please provide more details on the comments from the technician, like the placement is off in which direction, what are the reference points for these 500 and 200 microns (they are very different from our measurements).
> "The inner chip placement was off .500mm so I needed to reposition. The outer placement was off .200mm”.

"They were inboard toward the sensor area . I needed to slide the chips back  or outward. Michelle mention adhesion under some pads was not so good and created some issue but she got all in adjusting the powers.”

> Yi, Han-Sheng, Pu-Kai, do you have the measurement results on the relative x and y positions of the hybrids w.r.t. mounting holes, and compare them with design?
>
> ==> We actually discussed this in our internal meeting, but so far we don't know how to measure the relative x and y positions. Pu-Kai and Han-Sheng are still working on this. But we didn't measure this for FST003.  (Pu-Kai and Han-Sheng, please correct me if I said something stupid...)
>
> Cheers,
> Yi
>
> +++++++++++++++++++++++++++++++++++++++++++++++++++
> Yi Yang, Associate Professor
> Department of Physics
> National Cheng Kung University
> Tainan, 701 Taiwan
> E-Mail: yiyang AT ncku.edu.tw
> Tel: +886-6-2757575 ext.65237
> Fax: +886-6-2747995
> Group Web: http://phys.ncku.edu.tw/~yiyang
> +++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
> On Thu, Jul 2, 2020 at 7:53 AM Zhenyu Ye <yezhenyu2003 AT gmail.com> wrote:
> All the 8 APV chips were mounted and showed normal behavior in readout. I have instructed the Fermilab technicians to mount the Silicon sensors.
>
> One comment from the technician "The inner chip placement was off .500mm so I needed to reposition. The outer placement was off .200mm”.
>
> Yi, Han-Sheng, Pu-Kai, do you have the measurement results on the relative x and y positions of the hybrids w.r.t. mounting holes, and compare them with design?
>
> Best,
> Zhenyu
>
> > On Jun 19, 2020, at 7:18 AM, Yi Yang <yiyang AT ncku.edu.tw> wrote:
> >
> > Dear all,
> >
> > We've finished the second prototype and shipped it to Fermilab directly per Zhenyu's request today. The DHL tracking number is: 4658055916 
> > (https://www.dhl.com/en/express/tracking.html?AWB=4658055916&brand=DHL)
> >
> > Please find some details/pictures of this prototype here:
> > 20200619_FST_Second_Prototype_YiYang.pdf
> >
> > Overall it looks pretty good (much better than the first batch).
> > Thank you very much for being patient with us.
> >
> > Cheers,
> > Yi
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > Yi Yang, Associate Professor
> > Department of Physics
> > National Cheng Kung University
> > Tainan, 701 Taiwan
> > E-Mail: yiyang AT ncku.edu.tw
> > Tel: +886-6-2757575 ext.65237
> > Fax: +886-6-2747995
> > Group Web: http://phys.ncku.edu.tw/~yiyang
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > _______________________________________________
> > Star-fst-l mailing list
> > Star-fst-l AT lists.bnl.gov
> > https://lists.bnl.gov/mailman/listinfo/star-fst-l