star-fst-l AT lists.bnl.gov

Subject: Star-fst-l mailing list

List archive

Re: [Star-fst-l] question about thickness of hybrid

From: Te-Chuan Huang <tchuang.phys AT gmail.com>
To: nie <nie AT rcf.rhic.bnl.gov>
Cc: star-fst-l AT lists.bnl.gov
Subject: Re: [Star-fst-l] question about thickness of hybrid
Date: Sat, 18 Jul 2020 07:40:40 -0400

Hi Shenghui and Maowu,

Thanks Maowu provides the latest values.
At the time I built the geometry, we did not have any idea about the
thickness of hybrid.
1mm was just a temporary number used in the CAD file that Han-Sheng provided
me at that time.

Cheers,
Te-Chuan

> On Jul 18, 2020, at 1:44 AM, nie <nie AT rcf.rhic.bnl.gov> wrote:
>
> Hi Shenghui,
>
> For the prototype, we choose two vendors:
>
> old vendor: 310+/-50um;
> new vendor: 350+/-50um
>
> Hope it helps.
> Maowu
>
>
>> Hi Te-Chuan,
>> The thickness of hybrid is set to 1mm in FST geometry. Can you tell
>> me why you use this value?
>> For Maowu and Jianing, can you help me confirm it is the real value?
>> Thanks,
>> Shenghui
>> _______________________________________________
>> Star-fst-l mailing list
>> Star-fst-l AT lists.bnl.gov
>> https://lists.bnl.gov/mailman/listinfo/star-fst-l
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l

[Star-fst-l] question about thickness of hybrid, Zhang, Shenghui, 07/17/2020
- Re: [Star-fst-l] question about thickness of hybrid, nie, 07/18/2020
  - Re: [Star-fst-l] question about thickness of hybrid, Te-Chuan Huang, 07/18/2020