STAR HardProbes PWG

[Nihar Sahoo <nihar AT rcf.rhic.bnl.gov>]

Hi Diptanil,

I sign off your presentation slides and going to pass it to startalk.

Thank you
Nihar


On 2024-09-19 01:43, Diptanil Roy wrote:
> Hi Nihar, Yi,
>
> Thank you for your thoughtful comments. I have implemented all of your
> suggestions, and cut some slides. Overall, the general slide count is
> high because of animations.
>
> Please find some responses below:
>
> > Slide7,8: These slides come abruptly, can you try to make a story to
> > combining both jet angularity and D^0+jet in one slide
>
> I prefer the flow of the current slides where I mention possible
> changes in jets yield and their substructure in HIC and then talk
> about the reasons that these effects might potentially be different
> for heavy flavor jets - As a way to motivate looking at HF jets. I
> don't spend more than half a minute on this slide.
>
> > Slide24: This slide is not clear. Please mention what point you
> > want to make here.
>
> Agreed. I was just gonna verbally mention this - but what I am
> alluding to is the difference in behavior at different kinematic
> ranges. It could just be that - different kinematic ranges with
> different sensitivities, but could be more as well. This is an open
> question and our measurement is an additional data point in the
> discussion.
>
> > - p12: Are you using HT trigger? If so, please add triggering in
> > the BEMC part.
>
> There is no HT trigger used for this analysis.
>
> > p24, 25: I would add clear labels to indicate the kinematic ranges
> > for the three results.
>
> Yep, that's a great suggestion. Implemented.
>
> The new version is available here:
> https://drupal.star.bnl.gov/STAR/system/files/Diptanil_HardProbes_2024_v1.pdf
>
> Thank you.
>
> On Tue, Sep 17, 2024 at 7:26 PM Yi Yang
> <yiyang429 AT gate.sinica.edu.tw> wrote:
>
> > Hi Neil,
> >
> > Thanks a lot for the nice slides. I only have some minor comments
> > for your consideration.
> > - General: please make sure that you can finish it in time since
> > you have many slides.
> > - General: you have ~1/2 are for introduction, is it a bit too much
> > (but it summarizes very well)?
> > - p12: Are you using HT trigger? If so, please add triggering in
> > the BEMC part.
> > - p14: Add "%" in [0-10], [10-40], [40-80]
> > - p24, 25: I would add clear labels to indicate the kinematic
> > ranges for the three results.
> >
> > Cheers,
> > Yi
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > Yi Yang, Research Fellow
> > Institute of Physics, Academia Sinica
> > E-Mail: yiyang429 AT gate.sinica.edu.tw
> > Tel: +886-2-2789-6709
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> >
> > -----Original message-----
> > From:webmaster AT star.bnl.gov
> > To:Star-hp-l AT lists.bnl.gov
> > Date:Wed, 11 Sep 2024 01:32:31
> > Subject:[[Star-hp-l] ] STAR presentation by Diptanil Roy for HP2024
> > submitted for review
> >
> > Dear Star-hp-l AT lists.bnl.gov members,
> >
> > Diptanil Roy (roydiptanil AT gmail.com) has submitted a material for a
> > review,
> > please have a look:
> > https://drupal.star.bnl.gov/STAR/node/68885
> >
> > Deadline: 2024-05-25
> > ---
> > If you have any problems with the review process, please contact
> > webmaster AT www.star.bnl.gov
>
> --
>
> ~ Neil