sphenix-magnet-l AT lists.bnl.gov
Subject: sPHENIX discussion of the superconducting solenoid
List archive
Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ...
- From: "Makdisi, Yousef I" <makdisi AT bnl.gov>
- To: "Anerella, Michael D" <mda AT bnl.gov>, "O'Brien, Edward" <eobrien AT bnl.gov>
- Cc: "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
- Subject: Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ...
- Date: Wed, 4 Feb 2015 22:54:20 +0000
To all,
While Kin is correct. The area postings in 912 seem to change depending
on the type work being done. I will defer to D. Phillips as the current
magnet location is temporary and likely to change when work on MPS magnet
removal is done.
Another possibility is escorting as Kin proposed or to delineate the
area for the time being as controlled area. But let us wait till Dave is
back.
Regards,
Yousef
On 2/4/15 5:41 PM, "Anerella, Michael D" <mda AT bnl.gov> wrote:
>Was it ever mentioned in the meetings that the magnet was being placed in
>a radiation area? Is this where it will remain for the FY15 cold testing?
>Thanks
>Mike
>
>
>> On Feb 4, 2015, at 4:29 PM, EdwardOBrien <eobrien AT bnl.gov> wrote:
>>
>> Hi Kin,
>> Is a simple solution for all of us to take Rad Worker 1?
>> I had it for years when I worked on the AGS floor
>> but since we moved to RHIC, CAD User Training was all that
>> is required. It wouldn't be so difficult to take RW-1 again.
>> Thanks.
>>
>>
>> Ed
>>
>>> On 2/4/2015 4:10 PM, Kin Yip wrote:
>>> Hi,
>>>
>>> This afternoon, I feel that my job has finally got started. I've been
>>> talking with a few people including our ESSHQ Asso. Director Ed.
>>>Lessard
>>> and Division Head R. Karol, the HP Group Leader Paul Bergh, and Al
>>> Pendzick et. al.
>>>
>>> I just walked with Paul Bergh to the area where the Babar magnet sits
>>>in
>>> Bldg. 912. As of now, the area that the magnet
>>> sits is in the Radiation Area and most area of that huge building
>>> isRadiation Area. For that, you need theRad. Worker 1
>>> and C-A Access Training. There is an area near the ERL is now
>>> "Controlled Area with TLD requirement" (let me call it "CAWT").
>>> This morning, when the magnet arrived, the HP actually deposted the
>>>area
>>> from "Radiation Area" to "CAWT".
>>>
>>> You also need to sign a RWP (work planning) before you go to do work in
>>> the Radiation Area.
>>>
>>> Somebody is talking about the possibility of making the area where the
>>> Babar magnet is a "CAWT" area. But it's
>>> probably complicated and difficult. Because you may step into the
>>> Radiation Area without knowing ... and the ERL may be running
>>> soon and there is a small chance that the "CAWT" may become "Radiation
>>> Area". ( Even for a CAWT, you may still need the "C-AD User
>>> Training" and GERT to get the TLD. )
>>>
>>> I wonder how many of you don't have the Radiation Worker 1 training.
>>>We
>>> can arrange C-A Access Training (the C-AD User training
>>> for STAR/PHENIX physicists are not really that suitable) specially for
>>> this task.
>>>
>>> To just to take a look, I can escort you --- I've done before ... but
>>> you can't work but just "observe".
>>>
>>>
>>> Ed Lessard gave me a 5-10 minute lecture which has made me feel very
>>> important. He's worried that there are 3 groups of people (C-AD,
>>> Physics and Superconducting Magnet Div.) working in the Radiation area
>>> (or any area). So, it's my job to (try to) make sure that
>>> we don't have any "incident"/"accident" ...
>>>
>>> So, we (... a lot of involvement D. Phillips here) may certainly need
>>>to
>>> do some work planning with our Work Control Manager Peter Cirnigliaro.
>>> And we also need to pass Y. Makdisi's Expt. Safety Review Comittee ...
>>>
>>> In this aspect, I'm like the so-called Liaison Physicist (if not a
>>> safety officer) ...
>>>
>>> The bottom line is that there will be rules / regulations in C-AD that
>>> you need to observe and deal with before you can come to work in Bldg.
>>>912.
>>> They may not be difficult but we can't ignore them :-)
>>>
>>> If there is anything unclear, please come to talk to me and I'll try to
>>> sort this out.
>>>
>>> Kin
>>>
>>>
>>>
>>> _______________________________________________
>>> Sphenix-magnet-l mailing list
>>> Sphenix-magnet-l AT lists.bnl.gov
>>> https://lists.bnl.gov/mailman/listinfo/sphenix-magnet-l
>> _______________________________________________
>> Sphenix-magnet-l mailing list
>> Sphenix-magnet-l AT lists.bnl.gov
>> https://lists.bnl.gov/mailman/listinfo/sphenix-magnet-l
>_______________________________________________
>Sphenix-magnet-l mailing list
>Sphenix-magnet-l AT lists.bnl.gov
>https://lists.bnl.gov/mailman/listinfo/sphenix-magnet-l
-
[Sphenix-magnet-l] Short magnet meeting,
John Haggerty, 02/04/2015
-
[Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ...,
Kin Yip, 02/04/2015
-
Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ...,
EdwardOBrien, 02/04/2015
- Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ..., Kin Yip, 02/04/2015
-
Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ...,
Anerella, Michael D, 02/04/2015
- Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ..., Kin Yip, 02/04/2015
- Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ..., Makdisi, Yousef I, 02/04/2015
- Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ..., John Haggerty, 02/05/2015
-
Re: [Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ...,
EdwardOBrien, 02/04/2015
-
[Sphenix-magnet-l] It's Radiation Area mostly ... I need to make sure that we meet all the regulations ...,
Kin Yip, 02/04/2015
Archive powered by MHonArc 2.6.24.