sPHENIX discussion of the superconducting solenoid

[Edward O'Brien <eobrien AT bnl.gov>]

    Hi Kin,
     Thanks for the information. So if we can
    get 2 people to work full time on the drilling
    with two drills then this will take ~9 weeks
    once we factor in contingency. In a perfect world adding
    an additional person with an additional drill would
    reduce the 9 weeks to 6 weeks, but it is unlikely we would
    be able to work so efficiently that we'd be able to
    have that much schedule savings.
     Lets get going with two techs continuously drilling and
    tapping and in the mean time we'll see if it is possible
    to add a third person and drill.

    Ed
   

On 2/16/17 1:35 PM, Yip, Kin wrote:

Hi,

Thanks for the comment.  Though the no. of man-hours doesn't change, the no. of hours in time (if we can truly use two drills simultaneously all the time) will hopefully cut in half, right ?

Sent from my Verizon 4G LTE Smartphone

------ Original message------

From: Folz, Charles

Date: Thu, Feb 16, 2017 1:14 PM

To: Yip, Kin;Christie, William;

Cc: sphenix-magnet-l AT lists.bnl.gov;Kobasiuk, Frederick D;

Subject:RE: Remaining hours of drilling / tapping ~ 579 hours

All:

 

Please note that the use of two drills does not cut the required labor hours in half. There may be some economy gained by having two technicians able to provide mutual assistance to each other, but the required labor hours is still in the area of 579.

 

Charlie

 

From: Yip, Kin
Sent: Thursday, February 16, 2017 12:42 PM
To: Christie, William
Cc: sphenix-magnet-l AT lists.bnl.gov; Folz, Charles; Kobasiuk, Frederick D
Subject: Remaining hours of drilling / tapping ~ 579 hours

 

Hello Bill,

 

As I mentioned to you yesterday,  attached is a spreadsheet from Jon Hock that shows the technician hours needed to finish drilling holes in steel for sPhenix High-Field Test.  It does not include assembly hours for technicians, survey, etc…

 

After a couple modification (and timing observation), he came up with 579 hours for the remaining hours

of drilling and tapping.   ( For management type of people, you can add 25% contingency J )

 

Even with two drills at the same time, 579/2 ~290 hours is still a lot of hours remained to be done.  We need

all the help that we can get J

 

Kin

 

_______________________________________________
sPHENIX-magnet-l mailing list
sPHENIX-magnet-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-magnet-l