sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

[Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours

From: "Yip, Kin" <kinyip AT bnl.gov>
To: "Christie, William" <christie AT bnl.gov>
Cc: "Kobasiuk, Frederick D" <kobasiuk AT bnl.gov>, "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>, "Folz, Charles" <cfolz AT bnl.gov>
Subject: [Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours
Date: Thu, 16 Feb 2017 17:41:30 +0000

Hello Bill,

As I mentioned to you yesterday, attached is a spreadsheet from Jon Hock that shows the technician hours needed to finish drilling holes in steel for sPhenix High-Field Test. It does not include assembly hours for technicians, survey, etc…

After a couple modification (and timing observation), he came up with 579 hours for the remaining hours

of drilling and tapping. ( For management type of people, you can add 25% contingency J )

Even with two drills at the same time, 579/2 ~290 hours is still a lot of hours remained to be done. We need

all the help that we can get J

Kin

Attachment: hours-for-phenix.xlsx
Description: hours-for-phenix.xlsx

[Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours, Yip, Kin, 02/16/2017
- Message not available
  - Re: [Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours, Yip, Kin, 02/16/2017
    - Re: [Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours, Edward O'Brien, 02/16/2017
      - Message not available
        
        Re: [Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours, Edward O'Brien, 02/16/2017
        
        Re: [Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours, Hock, Jonathan, 02/16/2017
        
        Re: [Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours, Kin Yip, 02/16/2017
        
        Re: [Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours, Anerella, Michael D, 02/17/2017
        Re: [Sphenix-magnet-l] Remaining hours of drilling / tapping ~ 579 hours, Kin Yip, 02/17/2017