Star-fst-l mailing list

[Han-Sheng Li <acidhf AT gmail.com>]

Hi Zhenyu, 

I made several modifications to previous version, including the main structure, cooling tube and hybrids.

As we discussed before, we removed the middle part of outer main structure and modified some structure for gluing area.

In addition, I put the tube connectors and vias inside hybrid back. 

You can my slides here: https://drupal.star.bnl.gov/STAR/blog/hshengli/fstcaddisks1218

 

Cheers,

Han-Sheng

Zhenyu Ye <yezhenyu2003 AT gmail.com> 於 2019年12月20日 週五 上午5:48寫道：

Thanks, Han-Sheng. Can you please tell me the difference(s) if any to

https://drupal.star.bnl.gov/STAR/blog/hshengli/fst-cad1102

Zhenyu

> On Dec 18, 2019, at 5:00 AM, Han-Sheng Li <acidhf AT gmail.com> wrote:
>
> Hi Zhenyu,
>
> This is the updated disks of mechanical structure: https://drupal.star.bnl.gov/STAR/blog/hshengli/fstcaddisks1218
>
> Cheers,
> Han-Sheng
>
> Zhenyu Ye <yezhenyu2003 AT gmail.com> 於 2019年12月18日 週三 上午2:07寫道：
> Attendees: Han-Sheng, Xu, Yi, Zhenyu
>
> Mechanical structure - Yi
> 1) increase the thickness from 1.5 to 2mm, may achieve 200 micron flatness (will get the result on Friday). If so, glue layer between hybrid and structure can be used to improve further to 100 micron.
> 2) remove carbon fiber to increase the flow rate
> 3) add carbon fiber sheet?
> 4) change the shape/thickness of the ribs
>
> Gluing jig status - Yi
> AIDC is working on the design
>
> Schedule - Yi
> Jan 3, assuming mounting hybrids
> Jan 4-10, AIDC glue mechanical structure and hybrids
> Jan 15, send to UIC
>
> Storage box
> NCKU will design and make a few boxes for prototype modules. Yi will discuss with Han-Sheng about the current design
>
> > On Dec 16, 2019, at 8:43 AM, Zhenyu Ye <yezhenyu2003 AT gmail.com> wrote:
> >
> >
> >> On Dec 12, 2019, at 6:00 PM, Zhenyu Ye <yezhenyu2003 AT gmail.com> wrote:
> >>
> >> 3. Mechanical structure - Yi
> >> 3rd version of mechanical structures were delivered by EASTON. The changes w.r.t. v2 includes 1) a new type of PEEK+30% CF material that flow better during injection and thus less bending than the old type material 2) remove the center part of the outer region. The data from one set of the structures indicates bending around 500 and 700 microns for inner and outer region structures, respectively. The former seems to be worse than the previous version and Yi will try to find out the explanation from EASTON.
> >> Moving forward, Yi is going to ask EASTON to increase the thickness of the structure from 1.5mm to 2mm, which EASTON expects to improve the bending issue. This will take 1.5-2 weeks to see the results. Yi will also discuss with AIDC next Monday is to add CF sheets to increase the stiffness and thus improve the surface flatness. Yi agreed that we will have a meeting to discuss his findings next Monday 3:30pm BNL time.
> >
> > https://drupal.star.bnl.gov/STAR/event/2019/12/16/star-forward-silicon-tracker-meeting
> >
> >> Han-Sheng is working on a new Thermal-Stress simulation with the latest design, and may report next week.
> >
> > _______________________________________________
> > Star-fst-l mailing list
> > Star-fst-l AT lists.bnl.gov
> > https://lists.bnl.gov/mailman/listinfo/star-fst-l
>
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l