Star-fst-l mailing list

[Gerard Visser <gvisser AT indiana.edu>]

Hi Felix,
	I would merely add that we should hope to determine a length which fits but 
without too much excess cable. What excess there is, would have to be taken up 
in the lay of the cable outside the cone assebly as it plugs into the patchpanel 
board assembly. We should locate some pictures of the installed & cabled IST 
patchpanel boards for your reference. It should look similar.
        Sincerely,

                Gerard


On 7/14/2020 10:06 AM, Capotosto, Michael wrote:
> Hey Felix,
>
> I've attached the cable drawing for the purple cables we had assembled. They were 
> 8' long, +/- 1", from connector to the wires on the t-board.
>
> --Mike
>
> -----Original Message-----
> From: Star-fst-l <star-fst-l-bounces AT lists.bnl.gov> On Behalf Of Ye, Zhenyu
> Sent: Tuesday, July 14, 2020 9:36 AM
> To: star-fst-l AT lists.bnl.gov
> Subject: [Star-fst-l] FST Inner Signal Cable with T-board
>
> Hi Felix,
>
> To follow up on your question on the (purple) inner signal cable and T-board, 
> a picture can be found on slide 4 of the following slides 
> https://drupal.star.bnl.gov/STAR/system/files/FstModule3InnerSector.pdf
> I hope it gives an idea the orientation of the cable/T-board.
>
> About the cable length, if I remember it correctly we had a rough estimate 
> from Rahul, and Mike used it to build the prototype purple cables. I think a 
> precise estimation is still needed, which I guess you will get from looking 
> at the integration drawings.
>
> Best,
> Zhenyu