Star-fst-l mailing list

["Zhang, Shenghui" <shenghui AT uic.edu>]

Hi Mike and all,

I tried to use the new way to do unplugging of production hybrids and found the tool couldn't fit in the storage box shown at the attachment. So, I think that we couldn't use the new way during the module assembly.

Best,

Shenghui

---

From: Star-fst-l <star-fst-l-bounces AT lists.bnl.gov> on behalf of Aschenauer Elke-Caroline <elke AT bnl.gov>
Sent: Wednesday, April 7, 2021 10:04 AM
To: Visser Gerard <gvisser AT indiana.edu>
Cc: Star-fst L <star-fst-l AT lists.bnl.gov>; Sun, Xu <xusun87 AT uic.edu>
Subject: Re: [Star-fst-l] Found a new way to seperate t-board connectors

 

Dear Mike, All,

indeed awesome find, I agree with Gerard, let's buy them for all places we do any  plugging/unplugging of production hybrids.

Cheers elke

On Apr 7, 2021, at 10:59, Visser, Gerard <gvisser AT indiana.edu> wrote:

Hi Mike - wow - awesome!

This is an extremely good find, for reducing what I think is one of the highest risk areas in FST.

I would strongly suggest that those doing any​ plugging/unplugging of production hybrids anywhere, stop work until they procure this exact tool. It will be worth any delay that incurs. Of course, not my decision, only recommending here.

I am attaching here your two photographs so others on list can see.

Thanks, sincerely,

     Gerard

---

From: Ye, Zhenyu <yezhenyu AT uic.edu>
Sent: Wednesday, April 7, 2021 10:51 AM
To: Capotosto, Michael <capotosto AT bnl.gov>
Cc: Visser, Gerard <gvisser AT indiana.edu>; Sun, Xu <xusun87 AT uic.edu>
Subject: Re: Found a new way to seperate t-board connectors

 

Hi Mike,

Very nice!

Zhenyu

> On Apr 7, 2021, at 9:42 AM, Capotosto, Michael <capotosto AT bnl.gov> wrote:
> 
> Hey guys, 
>  
> Hope all is well. 
>  
> Had a thought pop into my head while I was staring at the half ring assembly, thought I’d share…
>  
> These snap ring pliers fit perfectly into the 2mm holes in the hybrid side Nicomatic connectors. They provide enough grip to easily un-mate the connectors, inserting the pliers as shown. The same goes for the outer. It has enough friction to gently wiggle the connector free. 
>  
> --Mike
> <Removing module ffrom t-board.jpg><Snap ring pliers.jpg>

<Removing module ffrom t-board.jpg><Snap ring pliers.jpg>_______________________________________________
Star-fst-l mailing list
Star-fst-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/star-fst-l

Note: Please do not feel obligated to respond to this message outside of your work hours.

 ( `,_' )+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-

  )    `\                                                      +

 /    '. |        Elke-Caroline Aschenauer  (she/her/hers)      =

 |       `,                                                      -

  \,_  `-/        Brookhaven National Lab                         +

  ,&&&&&V         Physics Dept.,            25 Corona Road         =

 ,&&&&&&&&:       Bldg. 510 /2-195          Rocky Point, NY,        -

,&&&&&&&&&&;      20 Pennsylvania Avenue                 11778       +

|  |&&&&&&&;\     Upton, NY 11973                                     =

|  |       :_) _  Tel.:  001-631-344-4769   Tel.:   +1-631-569-4290    -

|  |       ;--' |                           Cell-USA:  +1-757-2565224   +

'--'   `-.--.   |                           Cell-Europe: +49152220025211 =

   \_    |  |—‘                                                           -

     `-._\__/     Mail: elke AT bnl.gov        elke.caroline AT me.com           +

            +=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=

Attachment: WechatIMG768.jpeg
Description: WechatIMG768.jpeg