star-fst-l AT lists.bnl.gov
Subject: Star-fst-l mailing list
List archive
Re: [Star-fst-l] Found a new way to seperate t-board connectors
- From: videbaek <videbaek AT bnl.gov>
- To: "Visser, Gerard" <gvisser AT indiana.edu>
- Cc: Star-fst L <star-fst-l AT lists.bnl.gov>
- Subject: Re: [Star-fst-l] Found a new way to seperate t-board connectors
- Date: Fri, 09 Apr 2021 09:03:26 -0400
I resend this as Mike's address was wrong in the e-mails.
On 2021-04-09 09:01, videbaek wrote:
Let me chime in too.
The number of times that cable are connected/disconnected has to be minimized.
Of course for the production it has to be done 2 (3) times - for the
apv testing and after inner /outer
sensors mounting. So why not have one 'special box (w/o walls) for
holding a modules during this mounting, and testing, and put it back
in regular transport box for moving back/forth techs and storage.
I think this will reduce the overall risks.
Flemming
On 2021-04-09 08:21, Visser, Gerard wrote:
hi Shengui,
That doesn't look like the same tool. ??
But, would it anyway have fit if you came at it from the other
side (i.e. on the right in this picture?).
I would repeat my concern that unplugging of the hybrids from T
board without some way to apply the force directly to the connector
body, is a very high risk. If we can avoid ever doing that to a
production hybrid that would be much better. I think it is certainly
worth a few days delay to resolve this. (My opinion anyway.)
Sincerely,
Gerard
-------------------------
From: Zhang, Shenghui <shenghui AT uic.edu>
Sent: Friday, April 9, 2021 4:37 AM
To: Visser, Gerard <gvisser AT indiana.edu>; apotosto AT bnl.gov
<apotosto AT bnl.gov>
Cc: Star-fst L <star-fst-l AT lists.bnl.gov>
Subject: Re: [Star-fst-l] Found a new way to seperate t-board
connectors
Hi Mike and all,
I tried to use the new way to do unplugging of production hybrids and
found the tool couldn't fit in the storage box shown at the
attachment. So, I think that we couldn't use the new way during the
module assembly.
Best,
Shenghui
-------------------------
From: Star-fst-l <star-fst-l-bounces AT lists.bnl.gov> on behalf of
Aschenauer Elke-Caroline <elke AT bnl.gov>
Sent: Wednesday, April 7, 2021 10:04 AM
To: Visser Gerard <gvisser AT indiana.edu>
Cc: Star-fst L <star-fst-l AT lists.bnl.gov>; Sun, Xu <xusun87 AT uic.edu>
Subject: Re: [Star-fst-l] Found a new way to seperate t-board
connectors
Dear Mike, All,
indeed awesome find, I agree with Gerard, let's buy them for all
places we do any plugging/unplugging of production hybrids.
Cheers elke
On Apr 7, 2021, at 10:59, Visser, Gerard <gvisser AT indiana.edu>
wrote:
Hi Mike - wow - awesome!
This is an extremely good find, for reducing what I think is one of
the highest risk areas in FST.
I would strongly suggest that those doing any
plugging/unplugging of production hybrids anywhere, stop work until
they procure this exact tool. It will be worth any delay that
incurs. Of course, not my decision, only recommending here.
I am attaching here your two photographs so others on list can see.
Thanks, sincerely,
Gerard
-------------------------
From: Ye, Zhenyu <yezhenyu AT uic.edu>
Sent: Wednesday, April 7, 2021 10:51 AM
To: Capotosto, Michael <capotosto AT bnl.gov>
Cc: Visser, Gerard <gvisser AT indiana.edu>; Sun, Xu <xusun87 AT uic.edu>
Subject: Re: Found a new way to seperate t-board connectors
Hi Mike,
Very nice!
Zhenyu
On Apr 7, 2021, at 9:42 AM, Capotosto, Michael <capotosto AT bnl.gov>wrote:
ring assembly, thought I’d share…
Hey guys,
Hope all is well.
Had a thought pop into my head while I was staring at the half
hybrid side Nicomatic connectors. They provide enough grip to easily
These snap ring pliers fit perfectly into the 2mm holes in the
un-mate the connectors, inserting the pliers as shown. The same goes
for the outer. It has enough friction to gently wiggle the connector
free.
--Mike
<Removing module ffrom t-board.jpg><Snap ring pliers.jpg>
<Removing module ffrom t-board.jpg><Snap ring
pliers.jpg>_______________________________________________
Star-fst-l mailing list
Star-fst-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/star-fst-l [1]
_Note: Please do not feel obligated to respond to this message outside
of your work hours._
( `,_' )+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-
) `\ +
/ '. | Elke-Caroline Aschenauer (she/her/hers) =
| `, -
\,_ `-/ Brookhaven National Lab +
,&&&&&V Physics Dept., 25 Corona Road =
,&&&&&&&&: Bldg. 510 /2-195 Rocky Point, NY, -
,&&&&&&&&&&; 20 Pennsylvania Avenue 11778 +
| |&&&&&&&;\ Upton, NY 11973
=
| | :_) _ Tel.: 001-631-344-4769 Tel.: +1-631-569-4290
-
| | ;--' | Cell-USA: +1-757-2565224
+
'--' `-.--. | Cell-Europe:
+49152220025211 =
\_ | |—‘
-
`-._\__/ Mail: elke AT bnl.gov elke.caroline AT me.com
+
+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=-+=
Links:
------
[1] https://urldefense.com/v3/__https://nam04.safelinks.protection.outlook.com/?url=https*3A*2F*2Flists.bnl.gov*2Fmailman*2Flistinfo*2Fstar-fst-l&data=04*7C01*7Cshenghui*40uic.edu*7C967fedd4ba3e4866dd2b08d8f9d68b75*7Ce202cd477a564baa99e3e3b71a7c77dd*7C0*7C0*7C637534047146938416*7CUnknown*7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0*3D*7C1000&sdata=cCK00kokGBiHNFfxTrm4Nwt2X2sHz*2FSFIpI596Y2*2Bpw*3D&reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUlJSUl!!P4SdNyxKAPE!VinGO8FeIuIdvmWuGS_NSSqzq3mn3jttdBYzccQnUW-k_Gj4GguR9YDlcbTi4zi04m3Sl-0$
_______________________________________________
Star-fst-l mailing list
Star-fst-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/star-fst-l
--
Flemming Videbaek
senior scientist
videbaek @ bnl.gov
Brookhaven National Lab
Physics Department
Bldg 510D
Upton, NY 11973
phone: 631-344-4106
cell : 631-681-1596
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors
, (continued)
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Aschenauer Elke-Caroline, 04/07/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Zhang, Shenghui, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Visser, Gerard, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Aschenauer Elke-Caroline, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Visser, Gerard, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Zhenyu Ye, 04/09/2021
- Re: [Star-fst-l] Found a new way to seperate t-board connectors, Visser, Gerard, 04/09/2021
- Re: [Star-fst-l] Found a new way to seperate t-board connectors, Zhenyu Ye, 04/09/2021
- Re: [Star-fst-l] Found a new way to seperate t-board connectors, Visser, Gerard, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Zhenyu Ye, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Visser, Gerard, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Aschenauer Elke-Caroline, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Visser, Gerard, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
videbaek, 04/09/2021
- Re: [Star-fst-l] Found a new way to seperate t-board connectors, videbaek, 04/09/2021
- Re: [Star-fst-l] Found a new way to seperate t-board connectors, Zhenyu Ye, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Zhang, Shenghui, 04/09/2021
-
Re: [Star-fst-l] Found a new way to seperate t-board connectors,
Aschenauer Elke-Caroline, 04/07/2021
Archive powered by MHonArc 2.6.24.