List archive

• [Sphenix-magnet-l] 1000 A ... intentional and accidental fast discharge ... test again next Monday at 9 am., Kin Yip, 02/01/2018
• Re: [Sphenix-magnet-l] sPhenix - Quench explained, Yip, Kin, 02/04/2018
• [Sphenix-magnet-l] 2000 A ... but Cryo needs to be repaired, Kin Yip, 02/05/2018
  • Re: [Sphenix-magnet-l] 2000 A ... but Cryo needs to be repaired, Makdisi, Yousef I, 02/05/2018
• [Sphenix-magnet-l] Fwd: deformation report for the 2000 A, Kin Yip, 02/05/2018
• [Sphenix-magnet-l] Strain Gauge (measuring resistance), Kin Yip, 02/06/2018
• [Sphenix-magnet-l] Thursday run postponed to Friday (9 am)., Kin Yip, 02/07/2018
• [Sphenix-magnet-l] >4100 A ... but problem with the tap VT10 ... to decide on Monday whether to run on Tuesday or not, Kin Yip, 02/09/2018
• [Sphenix-magnet-l] sPhenix Voltage Tap, Schultheiss, Carl, 02/12/2018
  • [Sphenix-magnet-l] To run (the High-Field Test) again tomorrow at 9 am., Kin Yip, 02/12/2018
• [Sphenix-magnet-l] Magnet at 4830A, Franz, Achim, 02/13/2018
  • [Sphenix-magnet-l] FW: Magnet at 4830A, Sondheim, Walter E, 02/13/2018
  • [Sphenix-magnet-l] Reached 5% over the operating current, slowly discharged and then fast discharged all peacefully, Kin Yip, 02/13/2018
    • Re: [Sphenix-magnet-l] Reached 5% over the operating current, slowly discharged and then fast discharged all peacefully, John Haggerty, 02/13/2018
      • Re: [Sphenix-magnet-l] Reached 5% over the operating current, slowly discharged and then fast discharged all peacefully, Kin Yip, 02/13/2018
    • Re: [Sphenix-magnet-l] Reached 5% over the operating current, slowly discharged and then fast discharged all peacefully, EdwardOBrien, 02/13/2018
• [Sphenix-magnet-l] Reminder for today's sPHENIX Magnet Biweekly Meeting at 902A conference room, Yip, Kin, 02/14/2018
• [Sphenix-magnet-l] Brief Summary of today's sPHENIX Magnet Biweekly Meeting at 902A conference room, Kin Yip, 02/14/2018
• [Sphenix-magnet-l] Run again at 9 am Friday ... Please be punctual., Kin Yip, 02/15/2018
• [Sphenix-magnet-l] Gone back to 4830 A ... We're done ?! If anybody objects to our "conclusion", please let us know before next Tuesday., Yip, Kin, 02/16/2018
  • <Possible follow-up(s)>
  • Re: [Sphenix-magnet-l] Gone back to 4830 A ... We're done ?! If anybody objects to our "conclusion", please let us know before next Tuesday., Yip, Kin, 02/16/2018
    • Message not available
      • [Sphenix-magnet-l] Warm up, Yip, Kin, 02/20/2018
• [Sphenix-magnet-l] Deposted, Kin Yip, 02/22/2018
• [Sphenix-magnet-l] Back to using constant source to measure strain (as the short disappeared), Kin Yip, 02/23/2018
• [Sphenix-magnet-l] energy deposited on the copper (superconducting wire)/aluminium-stabilizer, Kin Yip, 02/27/2018
  • Re: [Sphenix-magnet-l] energy deposited on the copper (superconducting wire)/aluminium-stabilizer, Than, Yatming (Roberto), 02/27/2018
    • Re: [Sphenix-magnet-l] energy deposited on the copper (superconducting wire)/aluminium-stabilizer, Yip, Kin, 02/27/2018
• [Sphenix-magnet-l] Reminder of today's sPHENIX Magnet Biweekly Meeting at 902A conf. room at 1:30 pm, Yip, Kin, 02/28/2018

Archive powered by MHonArc 2.6.24.