List archive

• 17/12/01
  • [Sphenix-magnet-l] Plan to cool-down (End-walls to be closed next ~Wed. and then cool-down), Kin Yip
• 17/12/05
  • [Sphenix-magnet-l] pre-loading still not right ... Doing it the last time tomorrow morning (with Jon there) !, Kin Yip
• 17/12/06
  • [Sphenix-magnet-l] Reminder of today's sPHENIX Magnet Biweekly Meeting (1:30 pm at 902 conf. room), Yip, Kin
  • [Sphenix-magnet-l] Brief Summary of sPHENIX biweekly meeting (Dec. 6, 2017) at 1:30 pm at 902 conference room, Yip, Kin
  • [Sphenix-magnet-l] Brief Summary of sPHENIX biweekly meeting (Dec. 6, 2017) at 1:30 pm at 902 conference room (2nd try ... complete this time), Yip, Kin
• 17/12/08
  • [Sphenix-magnet-l] Finished installing the "Hall probes" ... End-walls next Monday/Tuesday <=== cool-down after that, Yip, Kin
  • [Sphenix-magnet-l] one bad RTD ... but I found a replacement from Len Masi, Kin Yip
  • [Sphenix-magnet-l] Gaussmeter measurements can be seen on GPM (in C-AD Control System) already, Kin Yip
  • Re: [Sphenix-magnet-l] Gaussmeter measurements can be seen on GPM (in C-AD Control System) already, John Haggerty
• 17/12/11
  • [Sphenix-magnet-l] RTD measuring 7... Linear pot ..., Yip, Kin
  • [Sphenix-magnet-l] Plant at full capacity ... waiting to re-start (to cool down) after we can install the end-walls, Kin Yip
• 17/12/12
  • [Sphenix-magnet-l] > half-closed ... cool down immediately after the end-walls are installed ! Please let me know if you have any objection., Yip, Kin
• 17/12/13
  • [Sphenix-magnet-l] last piece of steel ... 1st thing tomorrow morning., Yip, Kin
• 17/12/14
  • [Sphenix-magnet-l] Finally closed...pleasr start cool-down, Yip, Kin
  • [Sphenix-magnet-l] We are starting cool-down, Yip, Kin
• 17/12/16
  • [Sphenix-magnet-l] Cool-down in progress (unaffected by network outage) --- ~0.6 K an hour, Yip, Kin
• 17/12/18
  • [Sphenix-magnet-l] ~255-260 K, Yip, Kin
  • Re: [Sphenix-magnet-l] ~255-260 K, EdwardOBrien
  • Re: [Sphenix-magnet-l] ~255-260 K, Yip, Kin
  • Re: [Sphenix-magnet-l] ~255-260 K, EdwardOBrien
  • Re: [Sphenix-magnet-l] ~255-260 K, Than, Yatming (Roberto)
  • Re: [Sphenix-magnet-l] ~255-260 K, Yip, Kin
• 17/12/20
  • [Sphenix-magnet-l] Reminder of today's sPHENIX Magnet Biweekly Meeting in the 902A conference room at 1:30 pm on Dec. 20, 2017, Yip, Kin
  • [Sphenix-magnet-l] List of things to be done for the High-Field Test, Yip, Kin
  • [Sphenix-magnet-l] Brief Summary of Today's sPHENIX Magnet biweekly meeting (Dec. 20, 2017) at 1:30 pm at the 902A conf. room, Yip, Kin
  • [Sphenix-magnet-l] PK's wooden blocks help ! ... Only 133 F :-), Kin Yip
• 17/12/21
  • [Sphenix-magnet-l] Short-circuit test : Current log not perfect yet, Kin Yip
• 17/12/22
  • [Sphenix-magnet-l] Winston has just created the Elog for "sPHENIX-Magnet-High-Field-Test_2018, Kin Yip
• 17/12/25
  • [Sphenix-magnet-l] ~180 F (X'mas morning), Yip, Kin
• 17/12/27
  • [Sphenix-magnet-l] < 150K ... Cryo switches tomorrow ... Paul Giannotti works until night ..., Yip, Kin

Archive powered by MHonArc 2.6.24.